Mikrotik lack of space or full drive and the fix

-
This one is a tricky bug that I've ran into.

If you hit this, when you go to Files, you will see much more used space than what you're using. Often not enough unused space to upgrade.



Here's how to fix it.

You need the fix_space.npk file.

It's currently hosted here:
https://www.mikrotik.com/download/share/fix_space.npk

I mirrored it here if it disappears:
http://s000.tinyupload.com/index.php?file_id=34175859663734277043

Use it like a normal upgrade. Just put/drag it into your files then reboot your Mikrotik router. After the reboot you'll see your free space is normal.

Comments

Post a Comment

Popular posts from this blog

Mirroring ports on Mikrotik

-
Image
Most Mikrotik routers have switch chips. On most models you can use the switch chip to mirror a port to another port on the same switch chip. On the RB1100AHx2 there are two Atheros 8327 switch chips. One is ports eth1-eth5 and the other is eth6-eth10. Mikrotik has a wiki page on what models have which switch chip, and what is supported . To mirror all eth1 to eth2 traffic from the CLI: [admin@Mikrotik] /interface ethernet switch> print Flags: I - invalid   #   NAME      TYPE          MIRROR-SOURCE    MIRROR-TARGET    SWITCH-ALL-PORTS  0   switch2   Atheros-8327  none             none              1   switch1   Atheros-8327  none             none             [admin@Mikrotik] /interface ethernet switch> set mirror-source=ether1 mirror-target=ether2 0 [admin@Mikrotik] /interface ethernet switch> print Flags: I - invalid   #   NAME               TYPE          MIRROR-SOURCE              MIRROR-TARGET              SWITCH-ALL-PORTS  0   switch2          
Read more

Cygwin with the new Windows Terminal

-
Image
Windows Terminal is a new slick looking terminal for Windows. Here is how to get Cygwin added to it. 1. Install it from Microsoft. https://aka.ms/terminal 2. Open it and select the down arrow button. Go to Settings. 3. "Add a new profile" > "+New empty profile" 4.Name it whatever you want. Probably "Cygwin" might be good. 5. Set "Command line" to wherever your Cygwin.bat is. Default should be C:\cygwin64\Cygwin.bat 6. Save. Now your new Cygwin shell should show up as an option. All done! If you want you can set it as your default profile in "Settings". And for comparison, the traditional Cygwin terminal:
Read more